How to Properly Paint Graphics Cards (GPUs) - What to Know Both DIY and Professionally and How Your Warranty Is Effected
Updated: Oct 30
I. Introduction - Why Even Do It?
How to Properly Paint Graphics Cards (GPUs)?
Usually this boils down to one of 3 situations:
White GPUs are Expensive Compared to Black
Supply and demand: In general, white GPUs are less common in the market compared to black ones. They are manufactured in a lesser scale and even though white paint is not really that much more expensive than blacks and greys, it means its a premium option. Less people want white than black or grey and when they are out of stock its INSANE the prices they can hit

Cool Factor - Can I get something other than black, white and gunmetal grey?
Colors are cool. Stencils are cool. Why be only 3 colors?

You Are REALLY Into Something
Most of the time you don't want your rig to be specific to you so you can more easily resell parts. Sometimes you never plan to sell your hardware and want it to be what you are into with no limits. Football teams, video games you name it.

Now that you have been bit by the mod bug, what are the considerations? What kind of paint works? What wont crack? How do you do stencils? What happens when your GPU fails under warranty?
II. DIY Paint Jobs
Understand once you make the decision to mod your card, if you mess it up, its on YOU. If you do it right, you shouldn't have any issues as long as you take into mind these considerations and you have the right brand card. This is not an endorsement to DIY your card, so much as way to share how to do this type of work properly we have learned over nearly a decade of doing it.
1. Disassembly and preparation
Pretty bog standard disassembly. If its an older card, plan to replace thermal pads and paste. If not, if you are not sure how the card goes together, then use your phone and record your disassembly. Reverse your steps for reassembly. Paint shrouds, backplates and mid plates.
NOTE: Do not paint the fans (this can cause them to become unbalanced and prematurely wear out the bearings)
2. Surface cleaning and repair
Some parts can be painted, some can't. Most importantly any logos, text etc. will be missing after you paint. Tape the areas you don't want to paint. Blue painters tape is ideal with edge seal. Whatever the finish of the original materials, it will most likely replicate on the final product. Don't want lines/recesses? Sand it. Same process as painting a car part or anything else. Heatsinks can be painted, but its hard to get into all parts of the heatsink. You usually loose about 1-3 % conductivity on most radiators unless you do paint super thick which can lead to more. Generally don't paint the radiator.
NOTE: Painting heatsinks will void your warranty with every brand due to cooling potential loss. Painting shrouds and plates is usually not a problem.
3. Primer application
Not necessary on most parts but good practice. Primer bonds better than straight paint. I like using adhesive promoter primer which is almost like clear glue that helps paint bond to the surface. Even spray is important. Use an empty cardboard box and a well ventilated area to help. Take note of paint temperature minimum temperature and maximum temperature when you are painting it. Additionally consider humidity. If your environment is over 40% humidity (check the weather app) its a bad idea to paint in a garage or outside. Adhesive promoter is a great tool if you are painting surfaces that have finish you don't want to sand (like fake carbon fiber or brushed aluminum)
4. Types of paints to use for DIY work
Most spray paints are acceptable as long as they account for the material you are painting (metal or plastic) and is temperature resistant to 100C (max temp on a GPU). Whites do tend to yellow so make sure you pick a VERY stable white paint. Primer helps keep it stable.
Acrylic paint - Most acrylic paint is acceptable but not ideal for painting GPUs. Acrylics can react weirdly with certain plastics (causing cracks and eggshell patterns), the finish is acceptable and generally doesn't crack. Its a hard finish, but can be weird about hardener mixing adequately. Also most acrylic paints can't handle the heat put out by a GPU and soften and discolor with relatively low temperatures.
Automotive paint - Most automotive paints are more heat resistant but it can be hit and miss as to the type of paint in a can and material compatibility is not super common between plastics and metal. Certain variants of automotive paint are the best to use (see below)
Enamel paint - Engine Grade Enamel is the best paint hands down to paint GPUs. Heat resistant, hard surface, great material compatibility and generally a glossy finish (but there are mattes if that's more your flavor). The only disadvantage is that they can be pricy and they have a long cure time (some can be as long as a week long and 2 hours between coats). Read your paint, follow the instructions and it will work out well.

Airbrush paint - See above for acrylic paint (most airbrush paints are acrylics). As long as your paints can handle the heat you too can have great results.
5. Painting process
Paint a light first coat, thicker 2nd and 3rd coats. 3 coats is usually plenty. Start painting off what your are painting and finish your spray off what you are painting. A 90 degree angle with about 8-12 inches away from what your are painting is ideal. You can turn an old large box into a paint booth.
Note: One of the biggest things you can do is SHAKE UP YOUR PAINT properly. 5 minutes. Enlist a kid or a friend. The better its shaken up, the cleaner the finish you get. If you plan to learn to paint lots with rattle cans get a Boba mixer off of eBay to do your shaking for you.
6. Reassembly and testing
Reverse your steps, take your take peeling the tape and make sure things are FULLY cured before you reassemble. Whatever the "dry to touch" time is, double that number. If done right, your GPU is probably using a way higher quality TIM (thermal interface material), better thermal pads or fresh ones at least and temps should be better overall if done right.
III. Professionally Done Paint Jobs
What is different? What does it run?
Most of the time finish quality is high, things like SN lables are others are kept intact and most professionals WILL warranty their work against defects. Anyone not wanting to warranty the finish of the paint obviously lacks confidence in what they are doing or know they do a poor job.
Costs vary, we charge a flat hourly rate, generally like to rebuild the card with high performance thermal paste and pads. Charging flat rate doesn't work well because some cards take an ETERNITY to disassemble (looking at you 20 series founders 2080Ti) and are screw city.
Keep in mind the tear down for painting is MORE in-depth then a GPU rebuild, as some parts will be painted, others will not (like fans as they can get off balance or worse yet, get paint inside the fan bearing area) and more importantly gets torn down more than a cleaning as you are separating often tiny bezels to get painted. Its probably one of the most time consuming things you can do to a GPU besides LN2 Overclocking prep.
IV. Warranty Considerations and Conclusions
The Honest Truth:
Most manufacturers of GPUs are likely to try to deny the RMA if the card has been painted
Some manufacturers like PNY and ASUS may try to deny warranty if the card has even been disassembled. This is illegal per the Magnuson-Moss Warranty Act. Taking apart your card, re-thermal pasting, replacing worn out fans and pads and cleaning your GPU are all legally covered and protected acts. Tamper stickers (void if removed) has been ruled by the FTC as illegal to enforce. Know your rights, but be respectful. GPU shroud and plate paint jobs can be cited as the reason for a denial of warranty but per Magnuson-Moss, burden of proof falls on the manufacturer to prove the that damage was caused by the consumer, not the other way around.
Some companies like EVGA and MSI, will warranty your card even if painted, and in our experience will even offer to repair THAT card and send it back instead of replacing it with another one of the same model, as long as the card failure was not due the disassembly/reassembly or paint job work. This obviously takes longer but preserves your mod. This way you get your modified card back after repair in an extremely pro consumer move. That is a class act and one of the many reasons we recommend both manufacturers to our customers regularly.

Comments